Chinese translation for "foaming temperature"

发泡温度

Related Translations:

foamed:  发泡的泡沫状的

foam unit:  泡沫喷洒装置

foaming mould:  发泡模具

foam destroyer:  消泡器, 除沫器消泡器；除沫器

foam annihilator:  泡沫灭火器

foamed rubber:  海绵橡胶海绵橡皮泡沫橡胶；多孔橡胶泡沫橡皮

foam laminating:  泡沫层合泡沫塑料层压粘合

foam inhibition:  抑泡

foaming ingredient:  发泡组分

foaming time:  发泡时间

Example Sentences:

	1.	An ideal mathematical model is set up by mathematical analyses based on experiments . the model deals with the relation of the bubble diameter of foam glass to the grain size of the foaming agent and the foaming temperature . the model is a great help to the design of new type foam glasses 在实验的基础上应用数学分析方法，建立了较理想的泡沫玻璃的泡径和发泡剂粒径及发泡温度间的函数关系，对设计泡沫玻璃新品种有一定参考价值。
	2.	With the coated tih2 , the foaming process of aluminum has been researched in the laboratory . the results indicate that the weight of foamer and viscosity increaser sending to the melt aluminum , the time of agitation and holding at foaming temperature , will influence the structure as well as porosity of foam aluminum , so that the structure of foam aluminum can be adjusted by improvement technology parameter which is practical 西安理工大学工程硕士学位论文利用包覆的发泡剂在实验室对发泡工艺进行了研究，结果表明发泡剂的加入量、增粘剂的加入量、搅拌及保温时间都对制备泡沫铝的孔隙率和孔结构有明显影响，因此，通过调整工艺条件，可以调节泡沫铝的结构。
	3.	In this paper closed - cell foam samples with basically controllable pore structure and uniform distributed pore were prepared by means of melt foaming technique ( mft ) . by relative theory analysis and adjusting the content of foam agent , foaming temperature , stirring time and hold time , means of getting samples with high quality has been found 本文采用熔体发泡法，通过相关理论分析和控制发泡温度、搅拌时间、保温时间、调节发泡剂含量等制备出了孔结构基本可控、孔洞分布均匀的闭孔泡沫铝样品。
	4.	The results show that the optimal processing of 6061 aluminum foams which have structural uniformity and controlled porosity is the foaming temperature 620 - 690 , heating rate 45 / min - 60 / min and heat preservation time is 12 - 18min . according to pore size tih2 content is chosen . when pore size is big , tih2 content is high and heat preservation time is short , vice versa 研究结果表明，对于实验采用的6061铝合金粉末材料来说，加热发泡制备出孔隙结构均匀，孔隙率可控的泡沫铝的最优条件是，加热温度为620 - 690 ，保温时间为12 - 18min ，加热速率为45 - 60 min ， tih _ 2含量可以根据所需孔径的大小来确定。

Similar Words：

"foaming structure" Chinese translation, "foaming styrol" Chinese translation, "foaming substance" Chinese translation, "foaming surfactant" Chinese translation, "foaming system" Chinese translation, "foaming tendency" Chinese translation, "foaming test" Chinese translation, "foaming test apparatus" Chinese translation, "foaming test of crankcase oil" Chinese translation, "foaming the runway" Chinese translation